Concreting questions in Koo Wee Rup

The cheapest driveway is usually the one that puts money into a proper base and a simple broomed finish, not the one with the lowest number on a flyer. In Koo Wee Rup, skipping excavation on peat or clay is how a cheap driveway becomes a replacement. We will tell you if a plain finish or a partial replacement is the sensible way to spend the budget. We will not publish a cheap rate that ignores the ground.

Some overlay systems can give a textured, stone-like look on a slab that is still sound and stable. If the existing concrete has dropped, rocked or failed at the edges, an overlay will follow that movement. We only recommend a new face when the old slab deserves one.

It depends on the ground, the size, the access and the finish, and on how you want the surface to wear. We pour concrete, and we will tell you if a concrete driveway or patio is a good fit for your block. We will not run a price comparison on this site, because the figure only becomes real after a visit.

Start with a broom and a hose. A careful light pressure clean is usually enough for ordinary dirt. Harsh acids and aggressive high-pressure work can mark the surface and damage a sealer. For oil or rust, ask us before you try a strong product.

We do not publish a figure for a five-by-five square, in Australia or in Koo Wee Rup. Access, ground, thickness, the crossover and the finish all change the job. A small driveway on peat can need more prep than a larger driveway on firm ground. We will measure yours and put the scope in writing.

The texture can hold a little more dirt than a smooth slab, the wash has to be done well or the surface looks patchy, and it is not the simplest finish to produce. It is also not ideal if you want a floor you can mop like an indoor room. The grip and the way it hides everyday marks are why it is still a good choice on many wet, well-used Koo Wee Rup driveways.

We do not list a rate. Stone, the extra labour of the wash, the size, the access and — in this town — the ground all move the figure. We quote after we have seen the property.

It depends on the sealer, the weather and how the driveway is used. We recommend a first seal at the right time after curing, then a look later. If water no longer beads, or stains start to sit in, it is time to talk about a clean and a new coat.

Ordinary exposed aggregate is meant to have the stone slightly proud of the surface, which is what gives it grip. A honed or polished look is a different process and should be chosen at the start, not treated as a quick way to flatten a wash you later decide you dislike.

We do not publish a square-metre rate. Engineering, soil, access, thickness, edge beams and the complexity of the set-out all change the figure. We quote from the drawings and from a look at the site.

There is no single thickness for every two-storey house. The engineer designs the slab for the soil and the loads on that site. In Koo Wee Rup those soil conditions can be quite specific. We pour to the drawings, not to a generic number from a search result.

Residential slabs and footings are designed and built to the relevant Australian standard, with a soil report and engineering behind the details. We work to that design. The class of slab your site needs starts with the soil assessment, not with a paragraph on a website.

Again, the thickness is a design decision, not a single district rule. Two-storey loads and the soil class both matter. We will pour what the engineer has specified, and we will not thin a slab to make a day easier.